Control of deformations in metal structures in construction: methods and technologies
https://doi.org/10.21285/2227-2917-2024-4-746-752
EDN: CNAZUV
Abstract
The paper presents an algorithm to control deformations of metal structure supports caused by force and temperature effects. The study involved investigating the influence of these factors on the overall stress-strain state of the structure. A proposed methodology is based on numerical experiments, which include the creation of an information model of the structure, integration of data on temperature and force effects into it, and finite element analysis. Based on this data, corrective measures are introduced to control displacements using damping devices. The study reveals the effect of temperature loads on deformations of structures and proposes methods for their control. The suggested method using building information modeling and active displacement control systems enhances the reliability and durability of structures. The integration of modern technologies, including active dampers and adaptive structures, shows high potential for real-time deformation control. The successful application of such technologies requires thorough testing in order to further adapt them to specific conditions and project requirements.
About the Authors
N. A. Krasnoyarov
Irkutsk National Research Technical University
Russian Federation
Competing Interests:
Russian Federation
Nikita A. Krasnoyarov, Postgraduate Student
83 Lermontov St., Irkutsk 664074
Competing Interests:
The authors declare no conflict of interests regarding the publication of this article.
T. L. Dmitrieva
Irkutsk National Research Technical University
Russian Federation
Competing Interests:
Russian Federation
Tatiana L. Dmitrieva, Dr. Sci. (Eng.), Associate Professor, Head of the Department of Mechanics and Resistance of Materials
AuthorID: 312501
83 Lermontov St., Irkutsk 664074
Competing Interests:
The authors declare no conflict of interests regarding the publication of this article.
V. I. Sobolev
Irkutsk National Research Technical University
Russian Federation
Competing Interests:
Russian Federation
Vladimir I. Sobolev, Dr. Sci (Eng.), Professor, Professor of the Department of Mechanics and Resistance of Materials
AuthorID: 4041
83 Lermontov St., Irkutsk 664074
Competing Interests:
The authors declare no conflict of interests regarding the publication of this article.
References
1. Sidorov G.I. On The Determination of Temperature Stresses in Reinforced Plates by The Finite Element Method. Uchenye zapiski TsAGI. 1975;6(6):74-81. (In Russ.). EDN: MVCLJJ.
2. Ivanov V.P., Kul'bey A.G., Bondarev A.S. Evaluation and Use of Residual Resource Equipment for A Petrochemical Complex. Vestnik of Polotsk State University. Part B. Industry. Applied Sciences. 2022;10:92-97. (In Russ.). EDN: ZDOKHM.
3. Kushnarenko V.M., Chirkov Yu.A., Kleshchareva G.A., Reshetov S.Yu., Kleshchareva A.V. Causes of Premature Destruction of Heat Exchange Pipes of Power Equipment. Kazan State Power Engineering University Bulletin. 2021;13(1):75-84. (In Russ.). EDN: QOGFKJ.
4. Abyshova R.M. The Dependence of the Voltage and Resistance of the Pipeline On the Effects of Temperature. Transport and Storage of Oil Products and Hydrocarbons. 2018;1:42-45. (In Russ.). EDN: XWBWUX.
5. Nikolenko S.D., Sazonova S.A., Akamsina N.V. Assessment of The Bearing Capacity of the Structures of Technological Restas. In: Aspekty modelirovaniya sistem i protsessov. Materialy Vserossiiskoi nauchnoprakticheskoi konferentsii = Aspects of Modeling Systems and Processes. Materials of The All-Russian Scientific and Practical Conference. 27 May 2022, Voronezh. Voronezh; 2022. p. 220–229. (In Russ.). https://doi.org/10.58168/AMSP2022_220-229. EDN: AMPBXU.
6. Burenin A.A., Dats E.P., Murashkin E.V. Formation of The Residual Stress Field Under Local Thermal Actions. Mechanics of Solids. 2014;2:124-131. (In Russ.). EDN: SAKNEJ.
7. Kulyabko V.V., Yaroshenko D.S. Nonlinear Dynamic Interaction of Damping Devices with Railcars, Railways, Buildings and Constructions. Vibratsiya mashin: izmerenie, snizhenie, zashchita. 2012;3:24-30. (In Russ.). EDN: PCXTOB.
8. Zakora O.L. The Damping of Bridge Structures. Vestnik Dnepropetrovskogo natsional'nogo universiteta zheleznodorozhnogo transporta im. akademika V. Lazaryana. 2005;6:118-123. (In Russ.). EDN: VWACLX.
9. Paimushin V.N., Firsov V.A., Shishkin V.M. Integral Method of Surface Damping of Flexural Vibrations of Thin-Walled Structures. In: Dinamicheskie i tekhnologicheskie problemy mekhaniki konstruktsii i sploshnykh sred. Materialy XXV mezhdunarodnogo simpoziuma imeni A.G. Gorshkova = Dynamic and Technological Problems of Mechanics of Structures and Continuous Media. Proceedings of The XXV International Symposium Named After A.G. Gorshkova. 18–22 March 2019, Vyatichi. Vyatichi; 2019. p. 210–217. (In Russ.). EDN: NQEDQL.
10. Vasil'ev A.S., Romanov A.V., Shegel'man I.R. Search for Technical Solutions Regarding the Designs of Protective and Damping Devices for Containers. Global'naya nauchnaya integratsiya. 2012;6:34-35. (In Russ.). EDN: ROTLRV.
11. Belash T.A. Power Absorbers of Dry Friction in Seismic Protection Designs of Buildings and Constructions. Bulletin of Civil Engineers. 2012;1(30):66-70. (In Russ.). EDN: PANVBT.
12. Kochetov O.S. Calculation of System of Vibroprotection of Processing Equipment. Okhrana i ekonomika truda. 2014;2(15):30-36. (In Russ.). EDN: TZHTOP.
Review
For citations:
Krasnoyarov N.A., Dmitrieva T.L., Sobolev V.I. Control of deformations in metal structures in construction: methods and technologies. Izvestiya vuzov. Investitsii. Stroitelstvo. Nedvizhimost. 2024;14(4):746-752. (In Russ.) https://doi.org/10.21285/2227-2917-2024-4-746-752. EDN: CNAZUV
Views:
72
Email this article 